Change-Id: I292b4e9bf17c83f83ff43ac4c5870d33092d0c71

Change-Id: I2858c6cb74b96ffe6a799dc2ab02cbbe1c56abc7

Change-Id: I13eb005195ebbdee5016bf279cba423e388723a0
Reviewed-on: https://gerrit.libreoffice.org/43910Reviewed-by: Szymon Kłos <szymon.klos@collabora.com>
Tested-by: Szymon Kłos <szymon.klos@collabora.com>

Change-Id: I4c3480104cbec53a395bd11702949984fca452a0
Reviewed-on: https://gerrit.libreoffice.org/43899Tested-by: Jenkins <ci@libreoffice.org>
Reviewed-by: Noel Grandin <noel.grandin@collabora.co.uk>

Change-Id: Ia58552034aba32e9ecf00745d0cadc1e323c3c41
Reviewed-on: https://gerrit.libreoffice.org/43933Tested-by: Jenkins <ci@libreoffice.org>
Reviewed-by: Caolán McNamara <caolanm@redhat.com>
Tested-by: Caolán McNamara <caolanm@redhat.com>

switching back to a "Close" message-to-self without a response (as it had been
before dc3ff192 "Avoid further unwanted
interference of DbusIpcThread::execute/close").  Especially on a first start of
LO (where it restarts after creating the UserInstallation), it had been observed
that DbusIpcThread::close was blocked waiting on a reply in
dbus_connection_send_with_reply_and_block while DbusIpcThread::enable had
already successfully (i.e., without emitting any of the SAL_WARNs) proceeded
past sending the reply and was blocked on closeDone_.wait().  However that can
happen---it should be clear by now that I don't understand anything at all about
DBus.  :(

Change-Id: Id5f368a60b2d8dd8b7074308ac1ad6b6545131ff

Change-Id: Ib12923762b5dd4d255c89a5acc54fdc5678a58ed

SvStream::ReadFloat already does that, and SvStream is initialised
to SvStreamEndian::LITTLE by default.

Change-Id: I5859e43014533bcebef9d4b8f0678c516193b92e

Change-Id: I5e43710da971957af9953930dea7e103644d3f17
Reviewed-on: https://gerrit.libreoffice.org/43898Tested-by: Jenkins <ci@libreoffice.org>
Reviewed-by: Noel Grandin <noel.grandin@collabora.co.uk>

Change-Id: Ic45692152b039c0ee2f5659d7739c3a2517c5e83
Reviewed-on: https://gerrit.libreoffice.org/43876Tested-by: Jenkins <ci@libreoffice.org>
Reviewed-by: Caolán McNamara <caolanm@redhat.com>
Tested-by: Caolán McNamara <caolanm@redhat.com>

with fLeftStart == 1.0 (is allowed, see comment at mfCut) the whole
BezierSegment is needed and does not need to be cut at all so best would be to
add it to 'while' loop, after that the 'rest' will be added anyways so, add
'fLeftStart < 1.0' or 'fLeftStart != 1.0' (since limited to [0.0 .. 1.0]) to
the while in line 120 should do it

Change-Id: Ida87e06247d169482df26e665985753e634e149e
Reviewed-on: https://gerrit.libreoffice.org/43935Tested-by: Jenkins <ci@libreoffice.org>
Reviewed-by: Caolán McNamara <caolanm@redhat.com>
Tested-by: Caolán McNamara <caolanm@redhat.com>

Change-Id: I654152b964c6228efeb8b7cc7203064338fd1dd6
Reviewed-on: https://gerrit.libreoffice.org/43934Tested-by: Jenkins <ci@libreoffice.org>
Reviewed-by: Caolán McNamara <caolanm@redhat.com>
Tested-by: Caolán McNamara <caolanm@redhat.com>

Change-Id: Iba073b3a251827fefaba790e33dfc7c01b0b2154
Reviewed-on: https://gerrit.libreoffice.org/43897Tested-by: Jenkins <ci@libreoffice.org>
Reviewed-by: Noel Grandin <noel.grandin@collabora.co.uk>

...than 25313923 "Fix CppunitTest_services for
constructor-based implementations..." (which this commit reverts again).  My
claim that "the 'factory' would be the object itself" is nonsense, it would
rather be an ImplementationWrapper (but one that was freshly created for each
ServiceManager::createContentEnumeration).

Change-Id: I85c683cff6f9ba78d0f8567a53f8fcbc56fe55cf

Change-Id: I8a15da534ba2cf9968cba0ee1f1bb74d7e3a0d54

lets just use the built in parents stuff

Change-Id: I7bb705acfcd6c8c18168676b0cdb13c26ba5b95a

to getParentStmt and rename parentFunctionDecl to getParentFunctionDecl,
so I don't keep using accidentally naming my variables the same as the
functions.

Change-Id: I66f9452458c8b439e5132191ac5219fb6d420708

Project: help  4df523054a84cbade8cf2aff4f72400baca9ca55

Related: tdf#113455 update help to 'disable' the spinbuttons for special case

now that there's a checkbox for the special 'clear' state rather than
special empty spin button hackery to store this state

Change-Id: I72756336a6c7fe68aec7efcf53e7b8dfb4c3d8d1

Change-Id: I88656c558dfe1ef6e701ba54633bfe251bc4e279
Reviewed-on: https://gerrit.libreoffice.org/43884Tested-by: Jenkins <ci@libreoffice.org>
Reviewed-by: Caolán McNamara <caolanm@redhat.com>
Tested-by: Caolán McNamara <caolanm@redhat.com>

Change-Id: Ie522a0691ce269a4cc090057ddb54d8d0b1fa5e6
Reviewed-on: https://gerrit.libreoffice.org/43918Tested-by: Jenkins <ci@libreoffice.org>
Reviewed-by: Caolán McNamara <caolanm@redhat.com>
Tested-by: Caolán McNamara <caolanm@redhat.com>

Change-Id: I03b2e125736b7f8a7127174a7a837760f76f8249
Reviewed-on: https://gerrit.libreoffice.org/43893Tested-by: Jenkins <ci@libreoffice.org>
Reviewed-by: Caolán McNamara <caolanm@redhat.com>
Tested-by: Caolán McNamara <caolanm@redhat.com>

Change-Id: I88f80d417108822ceeb73c07cb49892925a2e57f
Reviewed-on: https://gerrit.libreoffice.org/43891Tested-by: Jenkins <ci@libreoffice.org>
Reviewed-by: Caolán McNamara <caolanm@redhat.com>
Tested-by: Caolán McNamara <caolanm@redhat.com>

Change-Id: I33d065780ece2aab5f5a07d0dfd5493005a22b33
Reviewed-on: https://gerrit.libreoffice.org/43917Tested-by: Jenkins <ci@libreoffice.org>
Reviewed-by: Caolán McNamara <caolanm@redhat.com>
Tested-by: Caolán McNamara <caolanm@redhat.com>

Change-Id: Ibc14583137aae0d46e501927e602a510339abe38
Reviewed-on: https://gerrit.libreoffice.org/43872Tested-by: Jenkins <ci@libreoffice.org>
Reviewed-by: Caolán McNamara <caolanm@redhat.com>
Tested-by: Caolán McNamara <caolanm@redhat.com>

Change-Id: I1a278302b995137d3e73620c003534498a59ba14
Reviewed-on: https://gerrit.libreoffice.org/43870Tested-by: Jenkins <ci@libreoffice.org>
Reviewed-by: Caolán McNamara <caolanm@redhat.com>
Tested-by: Caolán McNamara <caolanm@redhat.com>

Change-Id: Ia08ac1ae46d4af6df7b0a590752e17a6d9a6836e
Reviewed-on: https://gerrit.libreoffice.org/43869Tested-by: Jenkins <ci@libreoffice.org>
Reviewed-by: Caolán McNamara <caolanm@redhat.com>
Tested-by: Caolán McNamara <caolanm@redhat.com>

regression from

    commit 0ad8447d
    dyncolcontainer: convert nRight to std::vector

Change-Id: I9cdf80115a2be73ec2b30fd875a904de3333fddf
Reviewed-on: https://gerrit.libreoffice.org/43905Tested-by: Jenkins <ci@libreoffice.org>
Reviewed-by: Noel Grandin <noel.grandin@collabora.co.uk>

Change-Id: I1bdb332e40a2cf612b249dafa7620f700af19833
Reviewed-on: https://gerrit.libreoffice.org/43927Reviewed-by: Miklos Vajna <vmiklos@collabora.co.uk>
Tested-by: Jenkins <ci@libreoffice.org>

Change-Id: I83438eaf2c1045a9212a63ed9fd8b3371e9b06aa
Reviewed-on: https://gerrit.libreoffice.org/43896Tested-by: Jenkins <ci@libreoffice.org>
Reviewed-by: Noel Grandin <noel.grandin@collabora.co.uk>

This reverts commit cdd4b528.

The manual acquire()/release() is necessary to prevent a double-delete
if the exception is thrown

Change-Id: I5acc0840befba3981e13b084b8d347f8a2766e70
Reviewed-on: https://gerrit.libreoffice.org/43889Tested-by: Jenkins <ci@libreoffice.org>
Reviewed-by: Noel Grandin <noel.grandin@collabora.co.uk>

Before this, -D_WIN32_WINNT=0x0601 used to land to VS project simply
as _WIN32_WINNT (without value).

Change-Id: I68ebdc24c3181c5d9e046280756e4cefee3de46c
Reviewed-on: https://gerrit.libreoffice.org/43928Reviewed-by: Mike Kaganski <mike.kaganski@collabora.com>
Tested-by: Mike Kaganski <mike.kaganski@collabora.com>

Change-Id: I5b4359727ebf58bc121325d490e63f2c919dd7ab
Reviewed-on: https://gerrit.libreoffice.org/43921Tested-by: Jenkins <ci@libreoffice.org>
Reviewed-by: Julien Nabet <serval2412@yahoo.fr>

Change-Id: I96f64b7c259f04a67684bb699ea3cc43b68e40fa
Reviewed-on: https://gerrit.libreoffice.org/43913Reviewed-by: Julien Nabet <serval2412@yahoo.fr>
Tested-by: Julien Nabet <serval2412@yahoo.fr>

Change-Id: I1ff394ecd1fe805d671d666d8bc2522c33c40b50
Reviewed-on: https://gerrit.libreoffice.org/43922Tested-by: Jenkins <ci@libreoffice.org>
Reviewed-by: Julien Nabet <serval2412@yahoo.fr>

Change-Id: Idba5a30bc44c7b2bd951f954ea3bfd048b022660
Reviewed-on: https://gerrit.libreoffice.org/43920Tested-by: Jenkins <ci@libreoffice.org>
Reviewed-by: Eike Rathke <erack@redhat.com>

Change-Id: Id9e306877125b66f908d24048d236c55483330d0
Reviewed-on: https://gerrit.libreoffice.org/43916Reviewed-by: Thorsten Behrens <Thorsten.Behrens@CIB.de>
Tested-by: Thorsten Behrens <Thorsten.Behrens@CIB.de>

Previously, defines string like this:

  -DDBG_UTIL -DNOMINMAX -D_DLL -UNOMINMAX

would produce this defines list:

  DBG_UTIL;NOMINMAX;_DLL -UNOMINMAX

where last "define" is incorrect; proper list should be

  DBG_UTIL;_DLL

so that the undef'ed element would be properly eliminated from the
result. This patch takes care of this.

Change-Id: Ia66a1d6d0a6e0bbfd0022b22285b005609871336
Reviewed-on: https://gerrit.libreoffice.org/43923Reviewed-by: Mike Kaganski <mike.kaganski@collabora.com>
Tested-by: Mike Kaganski <mike.kaganski@collabora.com>

(regression from 16598d52)

Change-Id: Ic621979926a9629aa8d8fb95a80957850ae0661b

...after 022b1b2a "tdf#96505 Get rid of cargo
cult long integer literals"

Change-Id: I9e5cc9d63c2eddd1ad766c2f6b01a9ff49a09bfd

Insert constructor everywhere, except a couple places that apparently
want to compare GetMapUnit().

Change-Id: I1910deb60562e5e949203435e827057f70a3f988